x
Send Your Inquiry Today
Quick Quote

Hot Runner Injection Molds

A hot runner injection mold keeps the runner system molten throughout the cycle, so the runner is not ejected with the part. D-top Mould designs and builds hot runner molds that remove cold-runner waste, shorten cycle time and improve gate quality — especially for high-volume and thin-wall parts.

Hot runner cap injection mold on the molding floor at D-top Mould

Hot runner systems cost more upfront, but they pay back when material cost, cycle time and post-molding handling matter. We help you decide when a hot runner is worth it for your part.

What a Hot Runner Mold Delivers

  • No cold runner scrap — less material waste and no regrind handling
  • Faster cycles — no thick runner to cool
  • Cleaner gates — better surface quality at the gate area
  • Consistent filling — balanced melt delivery to every cavity

What We Supply

  • Hot runner mold design — manifold, nozzle and gate layout
  • Integration of your chosen hot runner system (or a recommended standard)
  • Multi-cavity machining — CNC, EDM and grinding
  • Temperature-controlled manifold setup and trials
  • CMM inspection and trial data

We do not include the hot runner controller or molding machine unless you request them.

Who This Is For

  • High-volume parts where material waste adds up
  • Thin-wall parts that need fast, even filling
  • Caps, closures and small precision components

What You Need to Provide

  • Part data — 3D model and 2D drawing
  • Material and annual volume
  • Gate requirements — vestige limits and cosmetic areas
  • Preferred hot runner brand, if you have one
  • Machine details and target cycle time, if known

Manufacturing Process

  1. DFM review — gate placement, material flow and balance
  2. Hot runner selection and manifold layout
  3. Mold machining — CNC, EDM and grinding
  4. Assembly and trials with temperature control
  5. Sample review and approval

Quality Control

  • Filling balance verified across all cavities in trials
  • Gate quality and vestige checked against your limits
  • Material and heat-treatment certificates available

Frequently Asked Questions

Is a hot runner worth the extra cost?

Usually yes for high volume or expensive material, and no for very low volume. Compare material waste, cycle time and handling — see our mold cost breakdown for how it affects total cost.

Can you use my existing hot runner system?

Yes. Send the system details or drawings and we integrate it into the mold design.

Do you recommend a specific hot runner brand?

We can recommend a standard based on your material and part, or work with the brand you already standardize on.

Request a Quotation

Send your part data, material and annual volume for a hot runner mold quotation. We return a recommendation on whether a hot runner is cost-effective for your project, with lead time.

Quick Quote

Related Pages

Scroll to Top