x
Send Your Inquiry Today
Quick Quote

Cold Runner Injection Molds

A cold runner injection mold lets the runner cool and eject with the part, then separates or regrinds the runner afterward. D-top Mould designs and builds cold runner molds — a simpler, lower-cost option for low-to-medium volume parts where the extra cost of a hot runner is not justified.

Cold runner injection mold with runner system at D-top Mould

Cold runner tooling is easier to maintain and cheaper to build. The trade-off is runner scrap and slightly longer cycles, which is why the decision is always made against your volume and material cost.

What a Cold Runner Mold Delivers

  • Lower tool cost — simpler design, no heated manifold
  • Easier maintenance — fewer heated components to service
  • Flexible gating — direct, edge or sub gates to suit the part
  • Good for low-to-medium volume where hot runner cost is not recovered

What We Supply

  • Cold runner mold design — runner, gate and cooling layout
  • Single- or multi-cavity machining — CNC, EDM and grinding
  • Runner balancing — even filling to every cavity
  • Mold trials and sample review
  • CMM inspection report

We do not include runner regrind or post-molding separation unless you request it as a secondary operation.

Who This Is For

  • Low-to-medium volume parts where hot runner cost is not recovered
  • Material that regrinds well, so runner scrap can be reused
  • Projects that need a lower-cost tool to start production quickly

What You Need to Provide

  • Part data — 3D model and 2D drawing
  • Material and annual volume
  • Gate and cosmetic requirements
  • Target cavity count or machine details
  • Critical tolerances and surface finish

Manufacturing Process

  1. DFM review — gate placement, runner size and balance
  2. Mold design — runner, cooling and ejection
  3. Machining — CNC, EDM and grinding
  4. Assembly and trials — fill and dimension check
  5. Sample review and approval

Quality Control

  • Filling balance and gate quality verified in trials
  • Dimensional report against your drawing
  • Material and heat-treatment certificates available

Frequently Asked Questions

Cold runner or hot runner — which should I choose?

For low-to-medium volume, cold runner is usually the better value. For high volume or expensive material, a hot runner often pays for itself — see our hot runner injection molds page.

Can the runner scrap be reused?

Many materials regrind well and the runner can be recycled back into the process, reducing waste.

Can you start with a cold runner and convert later?

Conversion is possible but usually means new manifold plates and re-machining. We review this before tooling so you start with the right system.

Request a Quotation

Send your part data, material and annual volume for a cold runner mold quotation. We confirm whether cold runner is the right value for your project, with lead time.

Quick Quote

Related Pages

Scroll to Top